HomeProductsCIPP LiningLining SystemsMulti-Bend LinerMulti bend liner 2.5mm thick (Price/m)
Description |
Single layer Polyurethane coated felt liner designed to negotiate multiple bends |
Diameter Range |
75mm, 100mm, 150mm |
Seam |
Stitched and sealed with Polyurethane tape |
Properties |
For bends up to 90° |
Capabilities |
Maximum size change of one nominal diameter |
Curing Method |
Ambient, Hot Water, Steam |
Resin Type |
Polyester, PU, Silicates, Epoxy |
Impregnation Method |
Vacuum unit and rollers to be used |
Installation Method |
Inversion |
Curing pressure |
0.5 bar |
Wall thickness - uncured |
3.1mm |
Wall thickness - impregnated and cured |
2.5mm |
General |
Liner must be supported at all points, otherwise it could expand beyond its designed diameter. Be aware that this material contains an element of stretch when inverted. |
Liner Size |
Resin Usage |
Roller Gap |
75mm |
0.7 ltr |
8.9 mm |
100mm |
0.9 ltr |
8.7 mm |
150mm |
1.4 ltr |
8.5 mm |
This information is provided in good faith only and without warranty. All calculations and settings are for guidance only. The liner should be visually inspected for defects before use. The Company reserves the right to make technical changes without notice as a result of continuous development.
By selecting the below you are agreeing to our cookie policy
Select the options you would like to use
Essential Cookies
We use cookies to provide and improve our services. By continuing to browse or by clicking 'Accept', you agree to the storing of cookies on your device to enhance your site experience and for analytical purposes.
Google Analytics tracking