Description
The Quick-Lock BIG was developed as a separable sleeve for the rehabilitation of man-entry pipeline systems. With the same trusted Quick-Lock technology, this heavy-duty system is engineered to provide a durable and permanent solution for typical types of damage including leaking pipe joints and radial cracking. Nominal size range DN 800 / 32” and above.
The Quick-Lock BIG consists of two-, three-, or four-part segments (shells), depending on the nominal size; one seal; and one set of screws. Made from high-grade stainless steel and an EPDM rubber gasket, Quick-Lock BIG offers superior corrosion resistance and a secure, watertight seal. Its trenchless installation method eliminates the need for digging, ensuring minimal disruption while delivering a fast and efficient repair.
How it works:
- The Quick-Lock BIG uses the principle of compression and is made from the materials 316L and EPDM.
- The separable sleeve is inserted into the pipeline system through the man-entry opening.
- The Quick-Lock BIG clamping tool is used to spread it out at the site of the damage.
What you need:
- The only thing needed to install the Quick-Lock BIG is the clamping tool set. This is also available for lease.
System advantages:
- Simple installation procedure
- Durable materials 316L stainless steel and EPDM
- Articulated supports
- No need for chemicals
- Low investment in system equipment
- Materials are permanently resistant to municipal wastewater
Quick-Lock installation equipment is available to hire as well as purchase. Call the team on 01226 397015 or email sales@s1e.co.uk to discuss your requirements.
Specification
Materials
The materials used here, 316L stainless steel and EPDM seal, have been proven for decades in the field of pipeline construction. The stainless steel grade 316L lasts virtually forever in municipal wastewater.
The EPDM seal is a state-of-the-art pipe engineering product with long service life and very high wear resistance.
Product range
Sleeves:
The Quick-Lock BIG is available in three configurations:
- Variant 1: Length 229mm, diameter DN 800–1300 / 32”–52”, internal pressure 1 bar / 14.50 psi, external pressure 0,3 bar / 43.51 psi (two-part)
- Variant 2: Length 229mm, diameter DN 1400–2100 / 56”–84”, internal pressure 1 bar / 14.50 psi, external pressure 0,3 bar / 43.51 psi (three-part)
- Variant 3: Length 229mm, diameter DN 2200–2400 / 88”–95”, internal pressure 1 bar / 14.50 psi, external pressure 0,3 bar / 43.51 psi (four-part)
Seal:
An EPDM seal
Screw set:
Locking screws, T-nuts, and sheath:
The length and quantity of the locking screws depends on the sheet metal thickness and nominal diameter. In order to use the system properly, it is imperative to meet the following specifications and to use the original screw sets.
The two different screw lengths are provided in red and blue bags to better tell them apart.
The sheath replaces and supplements the function of a washer.
Number of screws, T-nuts, and sheaths:
DN 800 – DN 1300 / 32” – 52”, 2-part: 4 pieces each
DN 1400 – DN 2100 / 56” – 84”, 3-part: 6 pieces each
DN 2200 – DN 3000 / 88” – 120”, 4-part: 8 pieces each
Screw length:
DN 800 – DN 1200 / 32” – 48“, length 16mm, bag: red
DN 1300-DN 3000 / 52”–120”, length 18mm, bag: blue
Shipping Information
Please note that the delivery estimates provided below are intended as a guide only. Please contact the S1E Team if you have specific deadlines or requirements.
For online orders:
Collection:
- From noon on the day of order, if the order is placed by 11am (Mon – Fri)
- The next working day following order placement, for orders placed after 11am (Mon – Fri)
- Opening hours for collection 0730-1700 (Mon-Thurs), 0730-1600 (Friday).
Deliveries to UK Mainland:
- Despatch on day of order placement if order is placed by 1pm (Mon-Fri), delivery next working day (Mon-Fri), not guaranteed.
- Despatch the next working day after order placement, if placed after 1pm (Mon-Fri), delivery in 2 working days (Mon-Fri), not guaranteed.
Deliveries to Northern Ireland:
- Despatch the next working day after order placement, if placed after 1pm (Mon-Fri), delivery in 2-3 working days (Mon-Fri), not guaranteed.
- Orders shipped to Northern Ireland are based on the weight of the items ordered up to 70kg.
- For orders over 70kg please contact our Sales Team directly on +44 1226 397015 or sales@s1e.co.uk for further advice.
More information
UK Only
